RaceChrono2AVI support forum: [Sticky] Download link for the latest version

Bottom of Page

1 to 15 of 15

- CommentAuthorledogme
- CommentTimeOct 29th 2008 edited
RaceChrono2AVI Ver 1.0.14 with manual
- First not beta version is out.
- Program setup in the zip.
- Many thanks to all the many friends who helped me in development of this software with beta testing and suggestions:
1. Antti, RaceChrono developer, beta tester and supporter
2. Taka, first beta tester and really enthusiast participation from the beginning and RX8 cockpit
3. Siklosi, for a lot of suggestion on programming techniques
4. Marco "Zampa", Porsche "ace" driver for his video and beta testing.
5. Enri996 for Performacebox data and (Performancebox compatibility is a work in progress atm)
6. Gigi, from bmwpassiont.it.
- CommentAuthorledogme
- CommentTimeOct 30th 2008 edited
0.3.23 beta
now with two new configurable options in the track map gauge .
Added "dot size" and "dot blinking enable", in order to add more visibility of the car dot on the track map. (thanks Taka)
- CommentAuthortakahashi
- CommentTimeNov 1st 2008
I just found out 0.3.23 beta also allows you to save your current configuration (where all the gauges are in the programs) and reload later if required. (the RX-8 ones are not from me .... haha ;).
- CommentAuthorledogme
- CommentTimeNov 5th 2008 edited
New version 0.3.27 beta

- Speed Smoothing
- new interface for customization of digital display and gauges.
- Digital displays can change foreground and background colors and can been bring to front.
- Also gauges can been bring to front.
- Program window got caption again and can be moved only using the caption.
- A new digital display for the "best lap so far", it will show the best lap only when it will reach and will blink for 10 seconds.
- Track gauge will not clear any more the original background before drawing the gps track, look at the varano track gauge for an example.
- Avoiding absolute path in cfg files.
- "ON AIR" icon shown when avi recording is active.
- Many other changes and bugs fix that now i can't remember :P

link is in top post.
- CommentAuthorledogme
- CommentTimeNov 16th 2008 edited
New version 0.3.4 beta
1. new installer
2. manuals installed with the program and linked to the start menu
3. fix a bug with exported session with invalid laps
4. fake transparent digital display
5. added support for trap name, split time display still to do
6. many improvement and bug fixes thanks to the beta testers work
7. better compatibility with RaceChrono 1.0 exported session
- CommentAuthorGigi
- CommentTimeNov 20th 2008
Dear ledogme, i hope to be intelligent enought to understand how to use this fantastic app!! Gigi
- CommentAuthorledogme
- CommentTimeNov 26th 2008 edited
New version 1.0.0
1. New Gauges directory organization, unfortunately this cause an incompatibility with old cockpit configuration.
2. Bigger digital displays.
3. Porsche GT3 cockpit
4. Some bugs less
5. Some bugs more :P
- CommentAuthorledogme
- CommentTimeDec 9th 2008
New version 1.0.2
1. Fix a bug with some regional settings, like Finland one.
- CommentAuthortd_in_tx
- CommentTimeDec 18th 2008 edited
Not sure if this is the right place to post this, but here I go.

I am using Racelogic exported data (Trackvision CSV files). The program works great! But for troubleshooting purposes here's what I've noticed with the CSV files I have:

1) The Gmeter digital displays are swapped. That is, lateral G's digital display is at the bottom of the vertical axis, and horizontal G's digital displayed is at the left. The "moving dot" is placed correctly, it's just the actual digital representation that is misplaced.

2) The program defaults to KPH, so if you save/export in MPH your units of measure are off. That is, numerically they are correct, but with KPH displayed. If you switch the speed box, it switches to MPH, but also down-converts the number.

3) Only certain .dsf files will work for laptiming. I tried to figure this out, but was stumped. I had an old saved .dsf file with splits in it, and it worked fine. But when I created a new .dsf file from the actual GPS data [with only start-finish saved (no splits)] I generated a "wrong CSV file format" error. I copied the split data only from the working file to the "new" file, and got a terminal error ["Run-time error '9': subscript out of range"] and the program terminated.
4) minor nit: the large digital display numbers are slightly cut off by the mp/h part of the display. Just the very last part of the right-most number.
Cheers, and thanks for all the work on this awesome program!

-td
- CommentAuthorledogme
- CommentTimeDec 19th 2008 edited
Thank You for your support. 1,2 and 4: I will check and fix it. 3: Can You send me the csv and dsf files? Because i have not good values to try a better compatibility. if you want send it to: ledogme AT gmail.com
- CommentAuthorledogme
- CommentTimeMar 1st 2009 edited
New version 1.0.14 Better GUI interface, displays and gauges now maintain correct zorder (bring to front) after save and loading, transparent displays now are fine if you move them. Performance box and Race-Technology DL1 csv support, both lack of laps informations so with this data you have to manually draw the start/finish line on the track in order to have lap time displayed, follow the instruction in the program.
- CommentAuthortd_in_tx
- CommentTimeMar 5th 2009
Excellent work! The new PerformanceBox start/finish works flawlessly! Bravo! Thanks for you hard work! One note: the KPH to MPH conversion seems to be off now. When I export PerformanceBox data using Metric units and select MPH in RaceChrono2AVI, they display correctly in during playbck. But if I click the MPH button, they conversion is off. For example, 120KPH displays as 65MPH. And 160KPH displays as ~88MPH. Again, thanks for the continuing efforts! -td
- CommentAuthormce
- CommentTimeJan 17th 2010
Is the project buried or under development?
- CommentAuthorledogme
- CommentTimeJan 21st 2010
I really don't know. Sorry
- CommentAuthoraol
- CommentTimeJan 21st 2010 edited
Ledogme, thanks for a great app! I hope you continue development at some point!

1 to 15 of 15