Hi, I use a ODB wifi device on a BMW M2 . I succeed to connect ODB on RC application (in vehicule profles) but I don't see the value . sometimes it is written searching .. (in red) Thanks
Can you create me a new session for troubleshooting purposes?
1) Please turn on "RaceChrono > Settings > Expert settings > Save device output".
2) Then record a session while connected to your OBD-II reader. It is connected if the "Connecting to..." goes away and does not appear again. Short session with GPS lock, and the OBD-II reader connected is ok. No need to be at a race track, just a casual drive around is fine.
3) Please share that session with me (using the share button, that generates a .rcz file) to tracks(at)racechrono.com
Comments
1) Please turn on "RaceChrono > Settings > Expert settings > Save device output".
2) Then record a session while connected to your OBD-II reader. It is connected if the "Connecting to..." goes away and does not appear again. Short session with GPS lock, and the OBD-II reader connected is ok. No need to be at a race track, just a casual drive around is fine.
3) Please share that session with me (using the share button, that generates a .rcz file) to tracks(at)racechrono.com